How do I clean the IMC08?

Please follow the following steps to clean the machine. Before cleaning the machine, please turn off the machine first.

1)Clean the Hopper

There are 3 parts need to be clean in the hopper: hopper sensor, banknote processing wheel and the banknote entrance, please use the nylon brush to clean them.

2)Clean the Stacker and Reject Pocket

As shown in the following figure, clean the stacker and reject pocket with nylon brush or cleaning cloth. Focus on the marked areas.

Figure 2-1 The Sensors in Stacker and Reject Pocket

3)Clean the Internal Sensors

• Pull the handle of back cover.

Figure 2-2 Handle of Back Cover

Figure 2-3 Back Cover Opened

• As shown in the following figures, clean the marked with cleaning cloth or nylon brush respectively.

Figure 2-4 Lower Sensors

Figure 2-5 Upper Sensor

Note: For the CIS sensors, it is recommended to used cleaning cloth to clean them, as shown in the following figures.

• Close the cover and finish the machine cleaning.