MUNBYN Leo
- Total activity 1721
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 7
- Subscriptions 862
Activity overview
Latest activity by MUNBYN Leo-
MUNBYN Leo created an article,
How do I enable the IMC27 to automatically accumulate the banknote counting results?
Press the "ADD" button to activate Add Mode— the ADD indicator light will illuminate.In Add Mode, the counter will keep accumulate the total number of bills when multiple stacks bills are counted. ...
-
MUNBYN Leo created an article,
How do you calculate the total amount of banknotes?
Value Mode (Manually preset the denomination)Press the "VALUE" button to activate Value Mode— the VALUE indicator light will illuminate.Repeatedly press the "VALUE" button to cycle through preset v...
-
MUNBYN Leo created an article,
How to disable the sound of beeping when triggering the error
Step 1: Long press ‘VALUE’ and ‘BATCH’ button at the same time to enter setting mode. Step 2: Click the ‘BATCH’ button for multiple times to switch the parameter to ‘C32’.Step 3: Click the ‘CUR’ bu...
-
MUNBYN Leo created an article,
How to disable the sound of beeping when pressing the keys
Step 1: Long press ‘VALUE’ and ‘BATCH’ button at the same time to enter setting mode. Step 2: Click the ‘BATCH’ button for multiple times to switch the parameter to ‘C30’.Step 3: Click the ‘CUR’ bu...
-
MUNBYN Leo created an article,
False Alarm happens frequently
Clean the sensorIf the problem persists, please contact us using the contact information below.Email: support@munbyn.comWhatsapp: +8618144898200
-
MUNBYN Leo created an article,
Counting result is not accurate
Solution 1: Click here to see how to adjust the feeding gapSolution 2: Clean the counting sensorIf the problem persists, please contact us using the contact information below.Email: support@munbyn....
-
MUNBYN Leo created an article,
The motor can not start or stop normally
Solution 1: Clean the feeding sensor in the hopperSolution 2: Check and connect the electric circuit of feeding sensor
-
MUNBYN Leo created an article,
Failed to turn the IMC27 on
Solution 1: Check if the plug is well inserted into socketSolution 2: Check if the power fails or fuse burn out
-
MUNBYN Leo created an article,
When and how should the feed gap be adjusted?
If bills feed unsmoothly or counting is inaccurate, adjust the vertical adjustment screw (to modify the gap between the resistance rubber and rubber wheel). To verify: Insert a bill and pull gently...
-
MUNBYN Leo created an article,
IMC27 Error code and solution
The description of the error codes and the related handling methods are as the table below.Error CodeReasonSolutionE10Fake note detected by UVRemove the fake note from the stacker, press “START” to...