How to reset the printer to reconfigure the network settings?

MUNBYN Leo

Press FEED (red/green light) button and hold on.
Release your finger when you hear five "Di" sound.
The indicator light of the device goes out and enters flashing mode.
You can check whether the device has been reset successfully by printing the device self-test page. If the SSID on the self-test page is displayed as "Wi-Fi" and the IP address is displayed as "000.000.000.000", it means that the device has been reset successfully.

(How to print a self-test page: Press and hold the green button on the top of the machine and release it after hearing two consecutive "Di" sounds)
Next, you can reconfigure the network settings through the App or WPS method.

Related articles