Does the device have the AP function to connect directly through the printer hotspot?

When you cannot configure the network on the device using Munbyn Print App, the device can directly enable the AirPrint function through its own hotspot.

Note: This feature currently only works on MacOS System.

1. Turn on the device, wait 15-20s for the device to complete initialization, and then connect the device directly to your computer through the USB connection method. (No driver download required)
2. Visit System preferences > Printers&Scanners, choose “Munbyn RW401AP” and click “Options&Supplies...” button.
3. Click”Show Printer Web page...”button. 
   
4. When you visit for the first time, the system may display the following prompt. Please click "Advanced" and then click to continue accessing, as shown in the red box in the picture:

5. Please first set an initial password for your device and enter the set password again to log in.

   （The initial password is set to 12345678）

   

   

6. Click “Wi-Fi Configuration Page”
7. Find the [P2P Enable] option and click the drop-down box to modify it to Enabled. After modification, please remember to click the [Apple Settings] button to save your settings.
   Note: Please do not modify other places to avoid failure to configure the network.
   

8. After the modification is successful, the device will enable its own AP function.
   You can search for the Wi-Fi network named [DIRECT-MUNBYN] on your iPhone or Macbook.
   Once found, please enter the default password [12345678] to connect and use AirPrint to print your content.