Setting

1. MG Sensitivity Adjust

MG sensitivity adjustment: press "SET/6" button for about 3 seconds to enter SET PARAMETER mode, then In this mode, press the “SET/6” Button to choose parameter, press the “+/5” and “-/BATCH” button to modulated parameter. If the parameter is larger, the MG sensitivity will be higher. If the parameter is more less, the UV sensitivity will be lower.

NOTE: after you finish the setting, please put your finger on hopper sensor and the roller will run, then the setting will be saved.

2. Factory Setting

Press “DD/0” “-/BATCH” “START” 3 buttons at the same time and then turn on machine, when machine sound the alarm, it means machine has restore to factory settings.