Video tutorial: munbyn.biz/webbp
Note: The Munbyn Editor currently supports Bluetooth printing for the RW402B and ITPP130B models only. If you have one of these models, you can follow these steps:
- Turn on your computer's Bluetooth.
- Power on your printer.
- Open Chrome and go to https://editor.munbyn.com to use the Munbyn Editor.
- Click "Log in" or "Sign up" to access your account.
- Click "Start Design" to start creating or to customize a label.
- Select the device and set the label size to prepare for design.
Create a label as shown in the figure below:
Custom label as shown in the figure below:
- Design label.
Note: The template is created successfully, the design is carried out within the template area, and the content beyond the area will not be printed.
- Click the print icon in the top right corner to prepare for printing.
- Select your Bluetooth printer to initiate the pairing process.
Note: When connecting a printer to a Mac or Chromebook, you may occasionally encounter two identical MAC addresses as shown in the figure. This is a normal, occasional occurrence during the printer connection process, so there's no need to worry.
Please print a self-test page and then check the last four digits of the MAC address to connect to your specific device.
- The printer status shows "Free time," indicating a successful connection. Adjust print speed and density if needed, then hit "Bluetooth Printing" to print.
Note: If the Bluetooth device pairing is unsuccessful, please refer to the section What should I do if the Web Editor cannot pair my Bluetooth device? for instructions.
Comments
0 comments
Please sign in to leave a comment.