ITPP905 How to Install a MacBook Printer Using a LAN Cable?

Note: To use the ITPP905 in a Macbook  environment, you need to install this printer driver in advance.

• Get the Macbook driver from the link:  munbyn.biz/905MACD
• If your system is updated, please uninstall the driver before installing it.

1、Setting up the printer network

Before installation, you need to connect the printer and the computer to the same router, and then
configure the IP address of the printer.

This method is suitable for the first time the printer is connected to the network cable.

1) Printer power on.

2) Plug the printer into the network cable.

3) Restart the printer, the printer will automatically obtain the IP address assigned by the router. Depending on the network environment, it may take several minutes to obtain the IP address. 

2、Install the printer driver

1) In the Mac menu bar, open the [System Preferences] and click the [Printers & Scanners].

2) The Printers & Scanners interface appears, then click [+].

3) Select IP and input the printer IP address (the printer must be in the same network segment as the mac OS computer).

4) Input the keyword 80 in the search box, and select the [POS-80], finally click [OK].

5) Click [Add] after selecting the printer software.

6) When finished, printer option with IP address will appear in the printer list.