ITPP047P How to set up on LAN port and make it a wireless network printer？

To connect the printer, follow these steps:
1. With the printer turned off, use a network cable to connect its LAN port to your router.

2. Turn on the printer and wait for it to automatically configure the IP address, which should take about 5 seconds.

3. Add a network printer in the POS software.

Note: If your POS software requires you to enter the printer's IP address, find it on the self-test page

How to print the self-test page:

turn off the printer power switch, long press the feed button and turn on the power switch, hear a beep,
release the feed button.

Demo video for adding a network printer in Loyverse: http://u.pc.cd/HpY7