MUNBYN Williams
- Total activity 643
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 266
Articles
Recent activity by MUNBYN Williams-
IPDA087: Why there is no sound when I scanning barcodes?
Please check if you have enable the sound in device settings, the scanning sound also from device speaker, so please check if you have turn on "Media Volume" and set proper volume. Besides, please ...
-
IPDA086/IPDA101: When I open the camera, it is black, what should I do?
There are several reasons for this problem：1) Please close the camera software in the task processThe reason for this problem is that the camera process is blocked in the background and the PDA can...
-
IPDA086/IPDA101:Why there is no sound when I scanning the barcodes?
Please check if you have enable the sound in device settings, the scanning sound also from device speaker, so please check if you have turn on "Media Volume" and set proper volume. Besides, please ...
-
IPDA084: Why is there no sound after a successful scan, I have turned on the sound?
A: Please ensure that the Scan app and system sound are both on. If you have any questions, please contact Munbyn Support Team.
-
IPDA083/IPDA088: How to add "Enter" and "Tab" key after scanning?
Sometimes, customer need to add function key Enter or Tab after scanning barcodes. Please set as below:Open InfoWedge, click Profile0, and find "Basic Data Formatting". You can find "Send Enter ke...
-
IPDA087: Why there is laser come out but without data output?
There are several reasons, please check as below. Reason one: Set improper output mode.Please check if you have set "Keystroke" as output mode.1. Open InfoWedge and select Profile0 2. Slide down an...
-
IPDA086/IPDA101: Why there is no sound come out when play music/video?
A: The reason for this is that the PDA is set to mute or the microphone is damagedPlease press and hold the volume keys + to adjust to a maximum or open the sound in the settings and adjust the Med...
-
IPDA086/IPDA101: How to add prefix/suffix to barcode data?
Please make sure that your device has already installed our InfoWedge.You can find related function in "Basic Data Formatting", please check set as below.1. Open InfoWedge, click Profile0 and find ...
-
IPDA084: How to convert the barcode output method, such as converting UPC-E to UPC-A or EAN-8 to EAN-13 barcode?
A: Please set it up in the Keyboardemulator app.Go to Keyboardemulator App.Touch 2DSettings> Barcode Settings > UPC/EAN(uses the UPC-A as an example).Touch Convert UPC-E to A.Figure 3- 9 Convert ba...
-
IPDA083/IPDA088: Statement on the scan distance(IPDA088-4750MR)
Q: Why this product cannot scan distant barcodes A: The IPDA088 is equipped with the SE4750MR scan head, this device can scan up to four meters, but please note that the scanning range will depend ...