IPDA083/IPDA088: How to add "Enter" and "Tab" key after scanning?

Sometimes, customer need to add function key Enter or Tab after scanning barcodes. 

Please set as below:

1. Open InfoWedge, click Profile0, and find "Basic Data Formatting".

    

2. You can find "Send Enter key" and "Send TAB key", turn on it accordingly. And don't forget to enable" Basic data formatting", otherwise it will not take effect.

   

3. Finally, make sure that you have sent proper output mode.

   
   
   If you have any questions, please contact Munby Support Team.