ITP05 Tattoo stencil printer how to clean the print head.

If the printout is unclear or shows white lines,  please clean the print head．

Demo vedio：https://www.youtube.com/watch?v=9qT-0aT4HIQ&list=PLWHuumZXv30MCa4jmZRHC_nD3ErEpDj23&index=4

1.  Power off the printer.

2 . As shown in the figure,  press the cover release button to open the flip-cover assembly. Then, remove any paper from inside the printer cover.

3. Rotate it to the required angle. Use a cotton cloth or cotton swab dipped in medical alcohol to clean the printer head. Wait 1 to 2 minutes before using the printer again.

If you have purchased a dust removal kit, you can use air blowing to remove dust. Please refer to the following figure for operation:

Dear MUNBYN Customer, contact us for further assistance,

E-mail: support@munbyn.com

Whatsapp: +8618144898200