MUNBYN Williams
- Total activity 643
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 266
Articles
Recent activity by MUNBYN Williams-
AS01: Why the app or the system sometimes freezes?
It is usually caused by resource exhaustion (e.g., insufficient memory), software conflicts, excessive cache, or system bugs.Here are the short troubleshooting steps, listed in order of operation:F...
-
AS01: Why does my PDA always turn off automatically when I use it?
For this issue, please troubleshot as below: 1. Please reinstall the battery, clean and check the pins. Besides, make sure that the battery is install tightly, and the buckle is under lock stat...
-
AS01: What should I do when the touchscreen unresponsive, screen displaying glitches?
In this case, please long-press the power button to restart the device first to see if the device will recovery. If not, please go settings>system>system>reset options>factory reset, to reset your ...
-
AS01: How to make the virtual keyboard not pop up ?
A： Please install this software and follow the steps in the installation software to use it without popping up virtual buttons.Software download links: http://u.pc.cd/Af67 Install the apk.2. Enabl...
-
AS01: Device can't power on
Please troubleshot as below: 1. AS01 has removable battery, please reinstall the battery and check if the pins have been damaged. Tips： please unlock the buckle when remove the battery; and lo...
-
AS01: How to copy M-Scan settings from one PDA to multiple PDAs？
1. Find one AS01, and open the M-Scan, click the three dots on the top. 2. Click "settings" icon in the corner, you will see a serial of settings related to M-Scan configurations.Customers can sele...
-
AS01: How to add prefix/suffix to barcode data?
You can find related function in "Basic Data Formatting", please check set as below.1. Open M-Scan, click Profile0 and find "Basic Data Formatting". 2. You can add any prefix or suffix as you l...
-
AS01: How to remove/delete barcode data that doesn't need?
Sometimes, customer want to delete or remove barcode data they don't need, for this issue, customer can use our M-Scan to edit data.1. Open M-Scan, click Profile0 and find "Basic Data Formatting". ...
-
AS01:How to add "Enter" and "Tab" key after scanning?
Sometimes, customer need to add function key Enter or Tab after scanning barcodes. Please set as below:Open M-Scan, click Profile0, and find "Basic Data Formatting". You can find "Send Enter key" ...
-
AS01: Why lost the final/first barcode digit after scanning?
A: Sometimes, when customers are scanning UPC or EAN barcodes, the final digit will not appear after scanning, in this case, please turn on "checksum" switch.1. Please open M-SCAN, open Profile0 an...