MUNBYN Sales
- Total activity 84
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 1
- Subscriptions 41
Articles
Recent activity by MUNBYN Sales-
ITPP941 Why is the printer printing blank labels?
1. The most common reason is that the labels were loaded upside down. Please ensure your labels are properly loaded, the side that can be used privately should face up (the side with the MUNBYN log...
-
When and how do I adjust the feeding gap adjustment?
Figure 2-6 The Adjustable Screw The screw above is used to control the width of the feeding gap. You can use a coin to adjust the gap easily. The width will become bigger by rotating the screw c...
-
ITPP941 Why the printer print extra blank labels after printing?
Note: Please make sure that the following three dimensions are consistent for correct printing:1. Your document size2. The label paper size you are using3. The size option you selected on the print...
-
How to clean the IMC01?
(1) TURN OFF THE MACHINE. Clean all 3 parts of the Hopper, using the included nylon brush. (2) a. Hopper sensor. b. Banknote processing wheel c. Banknote entrance (3) Clean the Stacker Sensors, usi...
-
Does the IMC01 work with a printer?
Yes, the ITPP107 printer is compatible with the IMC01. The ITPP107 can print the record of the counted banknotes, numbers, total currency value counted, as well as a breakdown of count by denominat...
-
ITPP941 Why does my Windows display the printer status as offline?
Please make sure you download the correct driver: ITPP941-WindowsYou can visit our Driver Center to download the most recent version of the driver: Printer - Drivers / SDK Download If the status of...
-
ITPP941 Why does the printer out a blank label when I load paper?
This is because the label printer is set to output a sheet of paper first to ensure printing on a sheet of paper. You can try to complete the following steps to see if the device can correctly re...
-
What to do if the IMC01 counts incorrectly or does not count?
This is because the CIS sensor of IMC01 is blocked by dust and the CIS sensor does not work. Please clean the IMC01 and refer to the demo video for CIS calibration. Demo video: https://munbyn.biz/I...
-
How to turn off the key beep?
You can follow the steps below to turn off the key beep: (1) Enter the main menu, and go to the service menu with the password “9999”, as shown in the following screenshots. Figure 2-24 Menu and S...
-
ITPP941 Valentine's Day Heart Shaped Stickers Setting
Notice 1. The label must be used with the label holder, the effect will be better. Without the use of the label holder, the label cannot be printed continuously, and the paper will become a crepe....