MUNBYN Williams
- Total activity 643
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 266
Articles
Recent activity by MUNBYN Williams-
IPDA086/IPDA101: Why is there no sound during the call?
Please make sure that if you have turn on the Call volume in settings.Check as below: If there is still no sound during the call, please contact Munbyn Support Team.
-
IPDA086/IPDA101: How to use GPS location service?
GPS is a very normal and important function in PDA, if you need to grant "location permission" to a certain app, please set as below. A:Please turn on "Location" function in settings. B: Grant Loca...
-
IPDA086/IPDA101: How to use NFC function?
A: If you want to test NFC function, please find a app named Appcenter, and find "NFC" function part.See pictures as below: When enter NFC function part, put a NFC card， simply tapping a NFC card ...
-
IPDA086/IPDA101: Why there is no Bluetooth devices nearby?
Please make sure you have have turn on Bluetooth function. Go settings>Connected devices>Pair new devices, you will see a device list. If you have any question, please contact Munby Support Team ...
-
IPDA086/IPDA101: Why the side buttons work while the pistol can't trigger scanning?
Please note that we have made InfoWedge a built in scanning app since 2025.If there is an app named InfoWedge, please troubleshot as below:1. Restore the InfoWedge, clicking "settings">"restore". ...
-
When using scanner, there is no data but scan-light on.
There are two reasons for this problem1）The barcode is not openPlease scan with the Internal Camera App download link: http://u.pc.cd/ulm7 Open the Barcode Scanner app Barcode scanning with the ca...
-
Why is the PDA unable to scan the code or no light is scanned?
There are two reasons for this problem1) The scanning process is stuckPlease restore the scan head, after restoration the scanning app will restart to solve the stuck problemGo to Scan AppTouch Set...
-
Why is it that when I turn on my PDA, the screen is lit but I can't see the screen on the display?
A: Please press and hold the Power button for 10 seconds to force the unit to switch off, leave it for 3 seconds, and then switch it back on. If there is still no display after switching on, please...
-
Why does the PDA power up when plugged into the USB cable, but power down when unplugged?
A: Please replace the battery with a new one This occurs because the battery capacity is insufficient or the battery contacts are damaged, resulting in a drawback.
-
When pressing the power buttons the device does not turn on but two LEDs blink.
A: There are two reasons for this problem. The battery is faulty. Verify that other batteries charge properly and reboot the PDA. If not, replace the faulty battery. Problems with the screen. Ple...