MUNBYN Williams
- Total activity 649
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 5
- Subscriptions 311
Activity overview
Latest activity by MUNBYN Williams-
MUNBYN Williams created an article,
How to set up GS1 barcode?
1. Click Infowedge 2. Click Profile0 (Default). 3. Then you can find the GS1 formatting 4. GS1 formatting: mainly for the processing of GS1 type barcodes, such as splitting barcodes, deleting GS...
-
MUNBYN Williams created an article,
How to force reset the device? (Forgot password)
Press and hold the power button and volume up button at the same time to enter recovery mode. Use the Volume keys to select Wipe data/factory reset and confirm with the Power key.
-
MUNBYN Williams created an article,
How to reset the device
1. Open the Settings app and find the System option. 2. Click on Reset option 3. Select Erase all data
-
MUNBYN Williams created an article,
Wi-Fi cannot be connected and Wi-Fi/Bluetooth connections are unstable.
1. The password may be incorrect. Please make sure that you entered the correct Wi-Fi password. 2. Reset network settings Path: Settings - System - Advanced - Reset options - Reset network Please...
-
MUNBYN Williams created an article,
Unable to identify SIM card
1. Please restart the device after changing the SIM card 2. Please check whether the SIM card is installed in the correct position and direction. 3. Please try to change another normal SIM card to ...
-
MUNBYN Williams created an article,
PDA cannot be charged
1. Check whether the device adapter and the device charging port are in good condition. Perform a charging test by replacing other working charging plugs/charging cables/charging docks; 2. If the d...
-
MUNBYN Williams created an article,
Endless restarts and the PDA gets stuck at a certain screen after booting up.
1. Please refer to Section 6.2 to reset the device. 2. Contact technical support to reinstall the operating system firmware.
-
MUNBYN Williams created an article,
AS01 does not turn on.
1. Check the charging status of the device. After charging for half an hour, press and hold the power button for more than 20 seconds to see if it can be turned on normally. This is to check whethe...
-
MUNBYN Williams created an article,
How to add prefixes and suffixes?
1. Open M-Scan, click Profile0, find the basic data formatting, and modify the prefix and suffix. Basic Data Formatting: perform simple processing operations on the data, such as adding prefixes an...
-
MUNBYN Williams created an article,
Why can't the grip scan?
1. Please try to reset M-Scan, please refer to section 1.1 2. Please try restarting or resetting your device 3. Please check whether the handle button is stuck. 4. Please check whether the handle a...