MUNBYN Leo
- Total activity 1721
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 7
- Subscriptions 862
Articles
Recent activity by MUNBYN Leo-
ITP05 Tattoo stencil printer How to adjust the filter in Luck Jingle App?
1.Select the tattoo picture you want to print and click the "Filter" below: 2. There are 3 filters: Original, Grayscali, Line drawing Click on the corresponding filter, and the image will show t...
-
ITP04 How to tear the roll of paper
First, straighten the roll of paper, then slowly tear it off along the cutter at the top of the printer. Demo vedio: How to tear the roll of paper?
-
ITPP047 turns on Epson mode
Download and Install the setup tool：https://munbyn.biz/tool51 Open the setup tool： If the Epson mode has already been turned on but you re-enter this page and see that the Epson mode has revert...
-
E13 Error
When the error "Face Recognition (E13)" Error is reported，please remove the banknote, clean the CIS sensor, perform the CIS sensor calibration. Video on Cleaning the CIS Sensor and CIS Calibration:...
-
ITPP941B Why does my Windows display the printer status as Error?
It might be possible that your ‘Printer Spool’ service choked on bad data and terminated, stop running correctly, or failed to start entirely (this is the case in safe mode). Corrupt data in the sp...
-
ITPP941B Why does the printer out a blank label when I load paper?
This is because the label printer is set to output a sheet of paper first to ensure printing on a sheet of paper. You can try to complete the following steps to see if the device can correctly re...
-
ITPP130 Why does my windows display the printer status as Error?
It might be possible that your ‘Printer Spool’ service choked on bad data and terminated, stop running correctly, or failed to start entirely (this is the case in safe mode). Corrupt data in the sp...
-
ITP01/A40 What are the applicable thermal paper using by A4 printer?
It is recommended to use official A4 thermal roll paper and 8.5''x11'' US Letter thermal folding paper, and it is also compatible with 2 inches (57mm*30mm), 3 inches (77mm*30mm), 4 inches (107mm*30...
-
How to replace label paper
1. Open the cover: According to picture ①, push the upper cover down to open the cover. 2. Consumables: According to picture②, the thermal surface of the paper should face the thermal head. 3. Clos...
-
Why does it print blank labels?
Please make sure the printing side of the label is facing up.