How to activate scanning with scan buttons ?

A: Press any yellow scan key by default to get a light scan out.

If it still fails to scan, there is a problem with the key value.

Please set the key value in the Keyboardemulator app.

1. Go to Keyboardemulator App.

2. Turn the scan button off.

Figure 3- 1 Enable scanner

Tips: If it is already closed, please skip this item.

3. Click on the KeyCode dialog area > press the yellow Scan key (if you press the key on the handle again when you insert the handle)

Note: Key-value is 291 for the body Left scan button, and 293 for the body Right scan button, and key-value is 294 for the Keyboardemulator gun grips scan button.

Figure 3- 2 Key settings

4. Check Barcode2D when finished and re-open Enable Keyboardemulator.

Figure 3- 3 Enable scanning