When you print an image that is not in the middle of the sticker, if it is not missing a large area but only a few millimeters distance difference, such as the image below
We need to set values in the horizontal offset or vertical offset of the print settings to make them print centered
How: Set the Horizontal offset to 1, you can adjust the size of the value to control the distance the position moves
Note: The Horizontal Offset controls the left and right movement of the label image
The Vertical Offset controls the up and down movement of the label image
Choose “Printer Features”->” Page Option”, then adjust the vertical and horizontal offset value according to the printing situation.
In order to avoid the need to re-select every time you print, you can save the settings in the "Presets".
You can do this by entering:
Settings -> Devices -> Printers and Scanners -> Click on 'Munbyn ITPP941' -> Manager -> Printing Preferences -> Page Setup
Please adjust the vertical and horizontal offset according to the printing situation Then click the “Apply” to save the offset settings.
Note: When you print a lot of labels continuously and the labels are getting more and more inclined, you need to check whether the label paper is fixed.