- Your printer is not loaded with label paper
The solution is that the light will turn green when the label paper is loaded into the printer.
- Your printer does not identify the size of the paper.There are two manifestations.
- After the printer successfully prints a label, it outputs a few blank sheets of paper and cannot print continuously, and then the printer appears red.
The printer only prints a small part of the text and the paper is jammed, and then the printer shows a red light.
Solutions for the above two situations:
Load no less than 4 consecutive sheets of paper into the printer,After the paper stop moving, press and hold FEED (red/green light), and when you hear a beep, release the feed. The printer will learn the size of the paper at this time. After the process is complete, the printer is back to normal.
- The label does not feed properly. There may be some abnormal noise at the situation.